zirconia Foam Filter For Steel Foundries
zirconia Foam Filter is a partial stabilized zirconia product, zirconia Foam Filters are widely used for molten steel and its alloy’s filtration
in steel foundries, they are also applied as fuel distributor in burner assembly and absorbing media in high-temperature waste-gas decontamination engineering.
zirconia foam filters are are characterized by high porosity, low loss of thermal shock, high mechanical strength, excellent resistance to attack and corrosion from molten steel liquid, they can effectively remove inclusions, reduce turbulence and provide rapid and consistent flow when applied as filter in gating system. They are machined to tight dimensional tolerance during production, this combination of physical properties and tolerance make them first choice for all steel foundries.
zirconia Foam Filter is available in dimension of 0-100mm with pore size from 10-40ppi. Special size is also available on order.
Size list for Zirconia foam filter:
Size(mm) | Pc/case | Size(mm) | Pc/case |
50*50*15 | 540 | ¢ 70×25 | 192 |
50*50*20 | 420 | ¢ 70×15 | 320 |
75*75*25 | 144 | ¢ 60×25 | 152 |
100*100*25 | 80 | ¢ 60×15 | 252 |
¢ 100×25 | 80 | ¢ 50×25 | 336 |
¢ 90×25 | 96 | ¢ 50×20 | 420 |
¢ 75×25 | 144 | ¢ 50×15 | 540 |
Note：Special size is available per order
